Tidy Tents. com
Anka Point and Fixings
The TidyTent and Bike Cave have a velcro detachable rear cut-out panel, through which one can fit the optional wall-mounted security bracket known as the Anka Point.
The Anka Point is a hardened steel, wall-mounted security bracket, which comes with a set of “one-way” clutch-head screws and wall plugs. Once attached to your wall or fence this creates a permanent fixture to anchor your goods with a padlock and chain or cycle lock. The Anka Point is also available as a separate product in its own right.
The TidyTent, Bike Cave and Anka Point together provide a low cost, self-assembly, convenient and weatherproof multipurpose shelter for a Serious Security Solution.A number of weight bags are included as standard. These can be filled with sand or pebbles and placed along the edges of the ground sheet inside to prevent the wind from blowing underneath. The recommended installation, however is to carefully place a number of old paving slabs or wooden blocks over the groundsheet to provide a more permanent and robust solution.
Shelter, security and convenience.
Tidytents.com is a independent distributor of the Tidy Tent and Bike Cave and is no way connected or represent the company tidytent.com ..a division of Rob McAlister Ltd
Against Walls & Fences
The TidyTent and Bike Cave can be installed in a wide variety of locations against walls and fences. The outer edge of the rear panel has 5 fixing points. Simply connect the main fibreglass rods and slide through two sleeves in the nylon/polyester fabric, inserting the ends into the “feet” in the base panel. Next place the 5 smaller rods into the eyelets in the front and rear panels to stretch the 2 arcs apart. Finally drill up to 5 holes and screw the back panel secure.